Related products
-
Organ Bath Modular-Teaching
AWS provides complete hardware solutions and associated software for isolated tissues studies from simple, manual systems to automated, computer-controlled systems. The AWS Modular Single Chamber Organ Bath was developed to provide a practical and functional design. They are used basically in teaching, where their low demanding maintenance, ruggedness and ease of use guarantee excellent didactic performance. This Modular option consists of a Perspex organ bath with a tissue chamber, three-way stopcock for physiological solution exchange and a fine needle valve for gas regulation. To maintain a constant temperature in the tissue chamber a Thermo regulated Water Pump is available which can be used with up to four Single Chamber Organ Baths at once. All organ baths include tissue holders, transducer holders, Micropostioner and tissue chambers (25 ml volume is supplied standard; 5, 10, or 50 ml volumes are available on request). Optionally, the AWS Modular Organ Baths can be associated with transducers, amplifiers and data output software from several brands. Common configurations use AD Instrument LABCHART or PANLAB PROTOWIN software for data storage and analysis, including Dose/Response.
Download:Organ Bath Modular-Teaching
-
Basic Single Tisue Bath
The walls of this bath are made of heavy, transparent plastic, so that the specimen can be consultant and easily observed. The tank is 100mm in diameter by 125mm high (4 x 5 in) and has a capacity of 800ml. Tank is solidly cemented to the base, which is constructed of formed white plastic. The plastic base offers the double advantage of not only being corrosion proof, but also serving as an excellent electrical insulator from the heater. A drain hole with tubing and plug is located in the bottom of the tank. There is also a tapered plastic cone in the bank bottom, into which the soft rubber bung carrying the stem of the glass tissue bath fits, making a convenient leak proof joint. The water bath is heated by a simple, sturdy cartridge element that is mounted off-center through the bottom on the tank. This heater has a rating of 50 watts. The temperature is controlled by an energy regulator mounted on the front of the bath. The dial has a position for “full energy” while the bath is being brought up to its desired temperature. A hole in three corners of the base can be used for uprights.
Download:Basic Single Tisue Bath
-
Single Tissue Bath
The walls of this bath are made of heavy, transparent plastic, so that the specimen can be
consultant and easily observed. The walls are 8mm thick. The tank measure
The two sides of the bath are extended to form a stand. The heating control housing is made
of white plastic, offering the double advantage of being corrosion proof and an excellent
electrical insulator from the heater.
Download:Single Tissue Bath
-
Isolated Organ and Tissue
This Heated Water Bath is for the most demanding research work.
It has two heaters having 250 watts of combined power.
The temperatur is automatically controlled by a sensitive thermistor
in a metal tube inside the bat to hold the bath water
temperature has stabilized. A magnetic stirrer in the bottom of the
tank slowly circulates the water to ensue uniform temperature.
These heaters are mounted through the front of the tank near the
bottom and extend 100 mm (4 in) into it. The desired temperature of
the Water Bath is set by a dial on the front panel that is graduated
from 15o to 45o C in 5o increments.
Two on/off switches and indicator lamps, one for power and the other
for the magnetic stirrer are on the front panel.
Download:Isolated Organ and Tissue


Reviews
There are no reviews yet.