Rabbit Restrainer

Related products

• 

  Broome Restrainers

  These popular Broome Restrainers provides fast and easy animal insertion. The cylindrical design of these Restrainers solves the problem of the rodents turning once they are introduced into the Restrainer.

   

  To place the animal into the Restrainer, loosen white Derlin nose piece and grasp the animal by the tail. Slide the animal into the Restrainer by pulling its tail along the open groove until the animal is completely enclosed in the cylinder. Then slide the nose piece into the groove on the opposite side of the Restrainer and place it up to the nose of the animal.

  Download:Broome Restrainers

  Add to wishlist

  Quick view

  Read more
• 

  Isolated Organ and Tissue 4

  Temperature automatically held within 0.5oC

  Dial graduated from 15o to 45oC in 5o increments

  Large 11.2 liter Water Bath capacity for stable temperature in

  Coils and Tissue Vessels

  Magnetic stirrer ensures uniform bath temperature

  250 watts off heating power for fast heat-up time

  Flat Warning Coils lie flat against the sides of the tank,

  leaving the center free for experimental procedures

  Large capacity (400 ml) Flat Perfusate Warming Coils en-sure

  a sufficient supply of temperature-controlled perfusate  for the

  mos lengthy assays

  Detachable Stem Tissue Vessel,

  supplied as standard, for increased convenience when changing

  Tissue Vessels (The without disturbing the stem or disconnecting

  the tubing for the warmed perfusate and drainage

  Downlaod:Isolated Organ and Tissue 4

  Add to wishlist

  Quick view

  Read more
• 

  Single Tissue Bath

  The walls of this bath are made of heavy, transparent plastic, so that the specimen can be

  consultant and easily observed. The walls are 8mm thick. The tank measure

  The two sides of the bath are extended to form a stand. The heating control housing is made

  of white plastic, offering the double advantage of being corrosion proof and an excellent

  electrical  insulator from the heater.

  Download:Single Tissue Bath

  Add to wishlist

  Quick view

  Read more
• 

  Basic Single Tisue Bath

  The walls of this bath are made of heavy, transparent plastic, so that the  specimen can be consultant and easily observed. The tank is 100mm in  diameter by 125mm high (4 x 5 in) and has a capacity of 800ml. Tank is solidly cemented to the base, which is constructed of formed white plastic. The plastic base offers the double advantage of not only being corrosion proof, but also serving as an excellent electrical insulator from the heater. A drain hole with tubing and plug is located in the bottom of the tank. There is also a tapered plastic cone in the bank bottom, into which the soft rubber bung carrying the stem of the glass tissue bath fits, making a convenient leak proof joint. The water bath is heated by a simple, sturdy cartridge element that is mounted off-center through the bottom on the tank. This heater has a rating of 50 watts. The temperature is controlled by an energy regulator mounted on the front of the bath. The dial has a position for “full energy” while the bath is being brought up to its desired temperature. A hole in three corners of the base can be used  for uprights.

  Download:Basic Single Tisue Bath

  Add to wishlist

  Quick view

  Read more