Description
The T Series PowerLab is an economically priced high quality DAQ unit with built-in, fully isolated, two-channel bio amplifier, isolated stimulator, separate non-isolated analog inputs, and a differential-mode analog output.
PowerLab
PL26T04
Integrated data recording featuring a dual Bio Amp, an isolated stimulator, trigger input, 4 analog inputs, 8 digital inputs and 8 digital outputs.Independent ADCs for each channel to keep data perfectly in sync.
We are authorised distributor of PowerLab.
Download:PowerLab Brochure ADInstruments
The T Series PowerLab is an economically priced high quality DAQ unit with built-in, fully isolated, two-channel bio amplifier, isolated stimulator, separate non-isolated analog inputs, and a differential-mode analog output.
Rectus Muscle Apparatus
*Tissue Bath Pyrex Glass
*Laboratory Stand with stainless steel rod.
*Simple light aluminum lever with ink writing frontal point
*Silicon Tube for Tissue Bath
*Boss Head brass
*Tissue Bath holding clump with boss head
*Stopcock Teflon
Download: Rectus Muscle Apparatus
Capacity: 3.6 Liter with decent look
Heaters 120 Watts
A float switch provides a safety cut off should the water level fall
below the minimum permitted level,
Two modes for solution replacement emptying and filling
Each tissue chamber has an adjustable gas diffuser for oxygenation and
push toggle on the front of the unit control the filling and emptying of the
tissue chambers via toggle switch.
Perspex sheet wall thickness 8mm
Magnetic Stirrer for uniform temperature
The control system provides an LED display
Inner Tissue Bath Standard 25ml Capacity Qty 1 with each Bath
Detachable Stem Tissue Vessel, supplied as standard,
for increased convenience when changing tissue vessels.
(The tissue chamber portion of the tissue vessel can be removed
without disturbing the stem or disconnecting the tubing for the warmed
perfusate and drainage.
Inner tissue bath Pyrex Material Graduated 25 ml Capacity
O ring provide 2 set
Warming Coil Round/Curve flat type
Power: 220 Voltages
Download:Student Single Tissue Bath
The walls of this bath are made of heavy, transparent plastic, so that the specimen can be
consultant and easily observed. The walls are 6mm thick. The tank measureThe two sides of the bath are extended to form a stand. The heating control housing is made of white plastic, offering the double advantage of being corrosion proof and an excellent electrical insulator from the heater.
Download:Single Tissue Bath 2
The walls of this bath are made of heavy, transparent plastic, so that the specimen can be consultant and easily observed. The walls are 6mm (1/4 inch) thick. The tank measure 140 x 215 x 155mm ( 51/2 x 81/2 x 61/4 ) and has a capacity of 4.7 liters.
The two sides of the bath are extended to form a stand. The heating control housing is made of white plastic, offering the double advantage of being corrosion proof and an excellent electrical insulator from the heater.
A drain hole with tubing and plug is located in the tank bottom and an overflow pope is mounted in the upper left edge of the tank, there is also tapered plastic cone in the tank bottom. Into which the soft rubber bung carrying the stem of the glass tissue bath fits, making a convenient leak proof joint. The water bath is heated by two simple, sturdy cartridge elements that are mounted through the fronts of the tank near the bottom and extend 50mm (2in) into it. These elements have a combined rating of 80 watts. The temperature of the water bath is controlled by a dial on the front panel that is graduated from 15 to 45 C, by 5 C increments. Inside the bath there is a metal tube that carries a sensitive thermostat sensing bead. This system maintains the bath within 0.5 C of the desired temperature once the bath temperature has stabilized. There is an indicator light in the front panel that glows when the bath is plugged into the AC line. There is also a second indicator light that glows whenever the heating circuit is energized. A screw-in fuse holder is also mounted on the front panel.
Download:Double Tissue Bath
Abdul Wahab & Sons provides advanced scientific and medical education solutions, including VR/AR, holograms, 3D Anatomy Tables, and PowerLab systems. AWS serve hospitals, research labs, medical schools, and universities with precision instruments, skill labs, and immersive learning tools empowering the future of healthcare and science.
No products in the cart.
For Help

Reviews
There are no reviews yet.