PowerLab (DAQ) Data Acquisition Hardware Device

PowerLab

PL26T04

Integrated data recording featuring a dual Bio Amp, an isolated stimulator, trigger input, 4 analog inputs, 8 digital inputs and 8 digital outputs.Independent ADCs for each channel to keep data perfectly in sync.

We are authorised distributor of PowerLab.

Download:PowerLab Brochure ADInstruments

Category: Pharmacology

Description
Reviews (0)

Description

The T Series PowerLab is an economically priced high quality DAQ unit with built-in, fully isolated, two-channel bio amplifier, isolated stimulator, separate non-isolated analog inputs, and a differential-mode analog output.

Reviews

There are no reviews yet.

Be the first to review “PowerLab (DAQ) Data Acquisition Hardware Device”

Related products

Student Double Tissue Bath

1              Capacity: 5 Liter with decent look

2              Heaters 120 Watts

3              A float switch provides a safety cut off should the water level fall

below the minimum permitted level,

4              Two modes for solution replacement emptying and filling

5              Each tissue chamber has an adjustable gas diffuser for oxygenation and

push toggle on the front of the unit control the filling and emptying of the

tissue chambers via toggle switch.

6              Perspex sheet wall thickness 10mm

7              Magnetic Stirrer for uniform temperature

8              The control system provides an LED display

9              Inner Tissue Bath Standard 25 ml Capacity Qty 2 with each Bath

10           Detachable Stem Tissue Vessel, supplied as standard,

for increased convenience when changing tissue vessels.

(The tissue chamber portion of the tissue vessel can be removed

without disturbing the stem or disconnecting the tubing for the warmed

perfusate and drainage.

11           Inner tissue bath Pyrex Material Graduated 25 ml Capacity

12           O ring provide 2 set

13           Warming Coil Round/Curve flat type

14           Power: 220 Voltages

Downlaod:Student Double Tissue Bath

Read more
Pharmacology Instruments

Ointment slabs 12″x12″in minimum 8mm thickness Heavy weight glass squares provide a hard nonporous surface for incorporating compounds into ointment bases. The roughened bottom minimizes movement. Smooth beveled edges resist chipping and make handling easier.

Download:b1

Read more
Isolated Organ and Tissue 4

Temperature automatically held within 0.5oC

Dial graduated from 15o to 45oC in 5o increments

Large 11.2 liter Water Bath capacity for stable temperature in

Coils and Tissue Vessels

Magnetic stirrer ensures uniform bath temperature

250 watts off heating power for fast heat-up time

Flat Warning Coils lie flat against the sides of the tank,

leaving the center free for experimental procedures

Large capacity (400 ml) Flat Perfusate Warming Coils en-sure

a sufficient supply of temperature-controlled perfusate for the

mos lengthy assays

Detachable Stem Tissue Vessel,

supplied as standard, for increased convenience when changing

Tissue Vessels (The without disturbing the stem or disconnecting

the tubing for the warmed perfusate and drainage

Downlaod:Isolated Organ and Tissue 4

Read more
Isolated Organ and Tissue

This Heated Water Bath is for the most demanding research work.

It has two heaters having 250 watts of combined power.

The temperatur is automatically controlled by a sensitive thermistor

in a metal tube inside the bat to hold the bath water

temperature has stabilized. A magnetic stirrer in the bottom of the

tank slowly circulates the water to ensue uniform temperature.

These heaters are mounted through the front of the tank near the

bottom and extend 100 mm (4 in) into it. The desired temperature of

the Water Bath is set by a dial on the front panel that is graduated

from 15o to 45o C in 5o increments.

Two on/off switches and indicator lamps, one for power and the other

for the magnetic stirrer are on the front panel.

Download:Isolated Organ and Tissue

Read more