Broome Restrainers

These popular Broome Restrainers provides fast and easy animal insertion. The cylindrical design of these Restrainers solves the problem of the rodents turning once they are introduced into the Restrainer.

To place the animal into the Restrainer, loosen white Derlin nose piece and grasp the animal by the tail. Slide the animal into the Restrainer by pulling its tail along the open groove until the animal is completely enclosed in the cylinder. Then slide the nose piece into the groove on the opposite side of the Restrainer and place it up to the nose of the animal.

Download:Broome Restrainers

Category: Pharmacology

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Broome Restrainers”

Related products

Basic Kymograph

The AWS Student Kymograph is designed for general experimental work, and is solidly built to with stand constant, hard laboratory use. The AC operated motor turns the spindle at five fixed speeds, from “muscle twitch” of 625mm per second down to 0.05mm per second.

Speeds: A dial on the front panel sets the gear box to one of five speeds. A “neutral” position, marked by an indicating dot between each of the speeds, protects the gear box. Using a cylinder 150mm (6 in) in circumference and printed chart. The following speeds and chart time bases are provided.

Download:Basic Kymograph

Read more
Double Tissue Bath

The walls of this bath are made of heavy, transparent plastic, so that the specimen can be consultant and easily observed. The walls are 6mm (1/4 inch) thick. The tank measure 140 x 215 x 155mm ( 51/2 x 81/2 x 61/4 ) and has a capacity of 4.7 liters.

The two sides of the bath are extended to form a stand. The heating control housing is made of white plastic, offering the double advantage of being corrosion proof and an excellent electrical insulator from the heater.

A drain hole with tubing and plug is located in the tank bottom and an overflow pope is mounted in the upper left edge of the tank, there is also tapered plastic cone in the tank bottom. Into which the soft rubber bung carrying the stem of the glass tissue bath fits, making a convenient leak proof joint. The water bath is heated by two simple, sturdy cartridge elements that are mounted through the fronts of the tank near the bottom and extend 50mm (2in) into it. These elements have a combined rating of 80 watts. The temperature of the water bath is controlled by a dial on the front panel that is graduated from 15 to 45 C, by 5 C increments. Inside the bath there is a metal tube that carries a sensitive thermostat sensing bead. This system maintains the bath within 0.5 C of the desired temperature once the bath temperature has stabilized. There is an indicator light in the front panel that glows when the bath is plugged into the AC line. There is also a second indicator light that glows whenever the heating circuit is energized. A screw-in fuse holder is also mounted on the front panel.

Download:Double Tissue Bath

Read more
Tissue Organ Bath Components Set

This heavy stand will solidly support the most elaborate assembly. The base measures 150 x 200mm(6 x 8 in), and is finished in tough, durable, smooth white nylon that is easy to keep clean. The base has a brass shoulder to take the upright. This shoulder is located at the center of the base to avoid imbalancing. The upright, which is locked in place with an Allen set crew, is made of stainless steel 12.5 (½ in) in diameter and 720mm (28 in) long. The entire stand weight 5.5kg (12lb) aprox., with base color Black/Red..

Download:Tissue Organ Bath Components Set

Read more
Rabbit Restrainer

This restrainer can be used with the help of curved back acrylic plate. This curved plate has a slider at bottom which can slide in the bottom sliders on restrainers according to animal size. Height and length are adjusted using only one plate. Neck can be adjustable by sliding the front top plate and fixing it in the comfortable position neck slot. The floor os restrainer is specially made rough to avoid skidding.

Download: b5

Read more