Tissue Bath Sets 2

Digital temperature control

Temperature automatically held within 0.1oC

from 15o to 50oC in 0.1o increments

Large 11.2 liter Water Bath capacity for stable temperature in

Coils and Tissue Vessels

Magnetic stirrer ensures uniform bath temperature

250 watts off heating power for fast heat-up time

Flat Warning Coils lie flat against the sides of the tank,

leaving the center free for experimental procedures

Large capacity (400 ml) Flat Perfusate Warming Coils en-sure

a sufficient supply of temperature-controlled perfusate for the

mos lengthy assays

Detachable Stem Tissue Vessel,

supplied as standard, for increased convenience when changing

Tissue Vessels (The without disturbing the stem or disconnecting

the tubing for the warmed perfusate and drainage

Downlaod:Tissue Bath Sets 2

Category: Pharmacology

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Tissue Bath Sets 2”

Related products

Rabbit Restrainer

This restrainer can be used with the help of curved back acrylic plate. This curved plate has a slider at bottom which can slide in the bottom sliders on restrainers according to animal size. Height and length are adjusted using only one plate. Neck can be adjustable by sliding the front top plate and fixing it in the comfortable position neck slot. The floor os restrainer is specially made rough to avoid skidding.

Download: b5

Read more
Student Double Tissue Bath

1              Capacity: 5 Liter with decent look

2              Heaters 120 Watts

3              A float switch provides a safety cut off should the water level fall

below the minimum permitted level,

4              Two modes for solution replacement emptying and filling

5              Each tissue chamber has an adjustable gas diffuser for oxygenation and

push toggle on the front of the unit control the filling and emptying of the

tissue chambers via toggle switch.

6              Perspex sheet wall thickness 10mm

7              Magnetic Stirrer for uniform temperature

8              The control system provides an LED display

9              Inner Tissue Bath Standard 25 ml Capacity Qty 2 with each Bath

10           Detachable Stem Tissue Vessel, supplied as standard,

for increased convenience when changing tissue vessels.

(The tissue chamber portion of the tissue vessel can be removed

without disturbing the stem or disconnecting the tubing for the warmed

perfusate and drainage.

11           Inner tissue bath Pyrex Material Graduated 25 ml Capacity

12           O ring provide 2 set

13           Warming Coil Round/Curve flat type

14           Power: 220 Voltages

Downlaod:Student Double Tissue Bath

Read more
Double Tissue Bath

The walls of this bath are made of heavy, transparent plastic, so that the specimen can be consultant and easily observed. The walls are 6mm (1/4 inch) thick. The tank measure 140 x 215 x 155mm ( 51/2 x 81/2 x 61/4 ) and has a capacity of 4.7 liters.

The two sides of the bath are extended to form a stand. The heating control housing is made of white plastic, offering the double advantage of being corrosion proof and an excellent electrical insulator from the heater.

A drain hole with tubing and plug is located in the tank bottom and an overflow pope is mounted in the upper left edge of the tank, there is also tapered plastic cone in the tank bottom. Into which the soft rubber bung carrying the stem of the glass tissue bath fits, making a convenient leak proof joint. The water bath is heated by two simple, sturdy cartridge elements that are mounted through the fronts of the tank near the bottom and extend 50mm (2in) into it. These elements have a combined rating of 80 watts. The temperature of the water bath is controlled by a dial on the front panel that is graduated from 15 to 45 C, by 5 C increments. Inside the bath there is a metal tube that carries a sensitive thermostat sensing bead. This system maintains the bath within 0.5 C of the desired temperature once the bath temperature has stabilized. There is an indicator light in the front panel that glows when the bath is plugged into the AC line. There is also a second indicator light that glows whenever the heating circuit is energized. A screw-in fuse holder is also mounted on the front panel.

Download:Double Tissue Bath

Read more
Tissue Organ Bath Components Set

This heavy stand will solidly support the most elaborate assembly. The base measures 150 x 200mm(6 x 8 in), and is finished in tough, durable, smooth white nylon that is easy to keep clean. The base has a brass shoulder to take the upright. This shoulder is located at the center of the base to avoid imbalancing. The upright, which is locked in place with an Allen set crew, is made of stainless steel 12.5 (½ in) in diameter and 720mm (28 in) long. The entire stand weight 5.5kg (12lb) aprox., with base color Black/Red..

Download:Tissue Organ Bath Components Set

Read more